EA-01 / In development
Angosta One
A hybrid in-ear monitor. Our first product, and not finished.
01 — Specification
The sheet so far.
Every row marked "to be confirmed" is a decision we have not made or a number we have not measured.
- Type
- Hybrid in-ear monitor
- Status
- In development
- Driver configuration
- 1 dynamic + 1 balanced armature + 1 piezo (current target)
- Frequency response
- To be confirmed
- Impedance
- To be confirmed
- Sensitivity
- To be confirmed
- Cable connector
- 0.78 mm 2-pin, detachable
- Shell material
- To be confirmed
- Faceplate finish
- To be confirmed
- Nozzle material
- To be confirmed
- Price
- To be confirmed
- Ship date
- To be confirmed
02 — Design notes
Part by part.
01 EA-01 / Shell
The body. It sits in the bowl of your ear and holds everything else.
The shell decides how the monitor fits, how much outside noise it blocks, and how long you can wear it. Material and final shape are still being worked out.
02 EA-02 / Faceplate
The outer cover, and the part everyone else sees.
The faceplate closes the shell and carries the wordmark. The finish is not decided.
03 EA-03 / Nozzle
The short tube that carries sound into your ear. The ear tip fits over it.
Nozzle length, angle and diameter change both comfort and treble. These are set by measurement and are not final.
04 EA-04 / Drivers
Tiny speakers. They turn the signal from your player into sound.
The Angosta One is a hybrid. The current target is three drivers per side: one dynamic driver for bass and lower mids, one balanced armature for mids and upper mids, and one piezoelectric driver for treble and air. This is a prototype target and may change.
05 EA-05 / Crossover
A small circuit that sends low, middle and high notes to the driver best suited to each.
The crossover is where a hybrid is tuned. Its values depend on the final drivers, so they are still open.
03 — Questions
Asked so far.
- Can I buy the Angosta One?
- Not yet. It is in development. There is no price and no ship date, and we will not take money until both exist.
- What is an in-ear monitor?
- An earphone that seals inside your ear canal. The seal blocks outside noise and lets very small drivers produce full sound, which is why musicians use them on stage.
- What does "hybrid" mean?
- A hybrid uses more than one kind of driver in each earpiece. A crossover splits the music so each driver plays the range it is best at. Our current target is one dynamic driver, one balanced armature and one piezoelectric driver per side.
- What do I get from early access?
- Email updates on the build before they appear anywhere else, and first notice when there is something to order.
- Why are so many specs blank?
- Because they are not final. We would rather show an empty row than a number we might have to take back.
04 — Early access
Follow the build.
One email when something real happens. First notice when there is something to order.
You're on the list.
We'll write when there is something real to report.